Product introductionDisc aerator has small aeration bubbles, large contact area, uniform bubble diffusion, not easy to produce hole blockage, and strong corrosion resistance. The unique disk structure design and the selection of high-quality materials have completely solved the problems that have been trapped in the operation of the microporous aerator for many years, (such as: diaphragm falling off, diaphragm tearing, diaphragm not opening, waste liquid reverse flow, etc.). The variable microporous aerator is designed with a slightly raised arched surface (mushroom type) and uses ABS engineering plastic as the main body. The diaphragm has a special imported rubber with anti-adhesion surface, which is made by special processing, and the diaphragm

Product introduction Corundum aeration is a bell type high-efficiency energy-saving air diffusion device with brown corundum sand as the main raw material, pressed and molded, high temperature sintering, this type of dawner has high hardness and stable chemical properties, and can be applied to various domestic sewage and industrial wastewater biochemical treatment, aquaculture and other aeration systems. There are two types of full corundum and semi-corundum. Compared with other types of aerators, it has the characteristics of stable operation, aging resistance, corrosion resistance, and suitable for continuous aeration tank operation, which creates an ideal market space for this product.

series microporous aeration tube gas diffusion hose is the original imported material, stable physical and chemical properties, long life: uniform perforation, uniform pore size, small diameter of expanded bubbles, large gas-liquid interface area, therefore, it has high oxygen transfer efficiency and high oxygenation efficiency. Compared with other existing layer gas devices, this can greatly save electricity consumption and reduce the operating cost of sewage treatment. Since the microporous aerator diffusion glue is made of imported high-quality rubber, it has excellent physical and mechanical properties; Fittings and air ducts are combined with ABS engineering plastics, so they are not afraid of rust, reliable performance, and greatly reduce the workload of operation and maintenance. This series of products is not easy to block, and has an aeration pipe that automatically cleans and prevents the reverse flow of sewage. Because when the blower suspends the air supply, the membrane immediately shrinks and closes, avoiding the reverse seepage of sewage in the aeration pipe, and when the blower moves again

The single-hole membrane aerator is a new type of air supply and oxygenation composed of upper and lower tube clamps made of ABS material and supporting rubber diaphragm. In the aeration biological filter process, the single-porous membrane aerator meets the sufficient and stable oxygen required for microbial metabolism on the filter media by forcibly transporting high flow rate air to the filter layer. The uniform air distribution and stable air volume inside the entire filter tank increase the organic load requirements of the system.