Product description:
This product is a water-soluble polymer. Because its molecular chain contains a certain number of polar groups, it can bridge between particles by adsorbing solid particles suspended in water or condense particles to form large flocs through charge neutralization. Therefore, it can accelerate the sedimentation of particles in the suspension, and has a very obvious effect of accelerating the clarification of the solution and promoting filtration.

Product model:
emulsion type

In addition to the advantages of solid polyacrylamide flocculant, the emulsion also has the characteristics of large charge density, high selectability, fast dissolution speed, low energy consumption, and convenient storage and use. Compared with traditional cationic polyacrylamide products, the emulsion is suitable for a wider range of PH values, higher charge stability, better flocculation effect, less dosage and a series of advantages. It is also suitable for construction sites where large dissolving devices are not installed.

Widely used in all kinds of domestic sewage, chemical wastewater, oilfield sewage, sludge dewatering treatment, papermaking and other fields, polyacrylamide water-in-oil emulsion is also widely used in urban domestic sewage treatment, breweries, starch plants, food processing plants and other sewage treatment. It is particularly suitable for flocculation and sedimentation of organic suspended solids in acidic or acidic sewage. In the paper industry, it is used as a retention aid and a filter aid for the treatment of papermaking sewage. In the petroleum industry, it can be used as an emulsion coating agent or degreaser for drilling.

How to use:
1) Solid powder is formulated into an aqueous solution with a concentration of 0.1%, and it is advisable to use neutral water without salts. When dissolving, sprinkle this product evenly into stirred water, and appropriate warming (<60 °C) can accelerate dissolution. Through a small test, determine the optimal dosage of this product and adjust the optimal PH value of the water to be treated.

2) When adding this series of product solution, the mixing with the treated liquid should be accelerated, and after the flocs appear, slow down the agitation speed to facilitate the growth of flocs and accelerate settlement.

3) When this product is used with polyaluminum chloride, the flocculation and sedimentation effect is better.

Storage and packaging:
1) Solid products are packed in polypropylene woven bags, lined with plastic bags, 25 kg per bag; The colloids are packed in fiber drums lined with plastic bags, 50 kg or 200 kg per drum.

1. This product has hygroscopicity, to be sealed and stored in a cool and dry place, the temperature should be below 35 °C. Avoid spilling solid products on the ground to prevent the floor from slipping after the product absorbs moisture.

3) Avoid using metal materials and other dissolving tanks and pools that are easy to affect water quality.