Product Description:

BWX-95 Defoamer flue gas desulfurization defoamer

Active ingredients: polyol ether and polyether ester complex.

Physical properties: appearance: colorless to light yellow transparent oily liquid; Hydroxyl value (mgKOH/g): 40-56. Moisture content; ≤ 1.5%; Density (20°C, g/cm3): 0.98-1.05; Water solubility : emulsion.

Product Introduction:

This product is a polyether composite defoamer developed for flue gas desulfurization of thermal power plants, which is composed of special organic compounds, which mainly inhibits the flue gas from being washed by limestone slurry in the absorption tower of the wet desulfurization system to produce a large amount of foam and prevent ash accumulation at the entrance of the absorption tower. The product is non-toxic, non-corrosive, chemically stable, non-flammable, non-explosive; It has the characteristics of strong hydrophobicity, long-lasting foam suppression and rapid bubble breaking; Good compatibility with aqueous system, no demulsion bleaching oil, no secondary pollution; It is also widely used in petrochemical sewage, papermaking sewage, leather sewage and chemical cleaning and other foaming systems.

BWX-28 antifoam

Active ingredients: silyl ether complex, modified siloxane, dispersant, emulsifier

Physical properties: appearance: milky white liquid; Stability (3000 rpm/20 min); Not layered; Non-volatiles: 26-30%; PH: 6-9.

Product Introduction:

BWX-28 is a silicone-modified defoamer developed for flue gas desulfurization in thermal power plants, which is composed of special organic compounds and modified silicones, which mainly inhibits the flue gas from generating a large amount of foam during the washing process of limestone slurry in the absorption tower of the wet desulfurization system, and prevents ash accumulation at the entrance of the absorption tower. Product feature 1: Quickly reduce the surface tension of gas and liquid, fast defoaming speed, long foam suppression time, can effectively prevent the overflow of absorption tower slurry; 2: The amount of addition is small, the amount of slurry added per 2000M3 is 0.5KG-1.0KG. 3: It is easily dispersed in water and does not react chemically with any substance in the slurry; The product is non-toxic, non-corrosive, stable chemical properties, no ignition hazard, safe for on-site use.

BWX-17 antifoam

Active ingredients: food-grade polysiloxane, dispersant

Physical properties: appearance: milky white flowing liquid; Density (20°C, g/cm3) 0.95-1.05; PH: 6-9

Product Introduction:

The BWX-17 power plant seawater defoamer is specially designed for defoaming and defoaming in DC seawater cooling systems. When the seawater cooling system uses oxidizing biocides to eliminate the effects of marine fouling organisms, a large number of marine organisms are killed, and their organic residues produce a large amount of foam in the large part of the seawater agitation, which is extremely stable in the normal state, affecting the flow rate and forming pollution phenomenon, and the use of XPJ170 power plant seawater defoamer can eliminate the foam in a very short time. XPJ170 is also extremely effective and fast in removing foam from the use of non-oxidizing biocides in seawater cooling systems. This product has no mineral oil component and will not cause oil drifting on the surface of the water. Due to the company's expertise in the development and application of food-grade polysiloxanes, the formulation design of seawater defoamers in power plants is more biodegradable and has no negative impact on the environment.

BWX16 antifoam

Active ingredients: polysiloxane, synergist, emulsifier, dispersant.

Physical properties: appearance: milky white fluid; Stability (3000 rpm/20 min); No stratification; Non-volatiles: 12-20%; PH 6-8; Non-ionic.

Product Introduction:

BWX16 is specially designed for the defoaming requirements of the water treatment industry, the product is easy to disperse no bleaching oil, fast defoaming speed, long-lasting foaming, will not cause secondary pollution of water, used in circulating water treatment, papermaking middle water, pharmaceutical sewage, leather sewage, power plant sewage, printing and dyeing sewage, desalination treatment sewage, urban sewage biological treatment system, flue gas desulfurization and other water-based foaming systems. Because the environmentally friendly surfactant used in the composition has non-toxic characteristics, it will not affect the bacterial reproduction of activated sludge, and it is widely used in many water treatment projects.

BWX 88 antifoam

Active Ingredients:

Physical properties: appearance: light yellow oily turbid liquid; pH (1% aqueous solution): 5 - 7; Viscosity (25 degrees): 500 - 1500cs ; Active substance content: 100%; Relative density (20 degrees): 0.85-0.95

Product Introduction:

BWX88 is a high-temperature resistant defoamer refined by special process with high-grade fatty alcohols, amides, polyethers and other substances, and its advantages are that it can stabilize defoaming and long-lasting inhibition of foam regeneration under strong alkali and high temperature; For example, a large amount of foam is frequently generated in the coal chemical evaporation crystallizer, and after foam is generated in the crystallizer, the amount of water processed by the crystallizer decreases, and there is no evaporation amount, and part of the foam is easily sucked into the compressor, which seriously affects the stable operation of the compressor and the crystallization unit; The XPJ880 quickly eliminates foam from the crystallizer while reducing foam inhalation in the crystallization compressor and increasing productivity. XPJ880 is also widely used in evaporation systems such as leachate, wastewater treatment, and process defoaming addition such as silicone application restrictions.

BWX15 antifoam

Active ingredients: high-grade fatty alcohols, biodegradable food-grade emulsifiers, dispersants.

Physical properties: appearance: milky white fluid; Stability (3000 rpm/20 min); Not stratified; Non-volatile: 26-30%; Kinematic viscosity (mPa.s, 25°C): 100-500.

Product Introduction:

BWX15 is a high alcohol defoamer developed for the requirements of municipal solid waste treatment, the main feature of the product is that it has very good biodegradable properties, the product can be completely dispersed and dissolved in water, will not produce any floating matter, and the product has been used by many users to give back: XPJ150 will not increase the COD value of sewage. The chemical properties of the product are stable, no toxic side effects, acid and alkali resistance, no corrosion, no secondary pollution, fast defoaming speed, long foam suppression time; This product can also meet the defoaming needs of various domestic sewage treatment processes and industrial sewage treatment plants such as seawater desalination.

BWX96 antifoam

Active ingredients: modified polyether polyols, organic esters, dispersants, synergists.

Physical properties: appearance: colorless to light yellow liquid; Density (20°C, g/cm3): 0.85-0.95; Moisture ≤ 1%; Kinematic viscosity (mPa.s, 25°C): 150-500; Dispersibility: Can be completely dispersed in water.

Product Introduction:

BWX96 is a highly effective non-silicon defoamer designed for the foaming characteristics of the wastewater treatment industry, using a variety of defoaming actives refined by a special process. XPJ960 is completely soluble in water and will never produce the defects of silicone defoamers that tend to cause floating objects. This product has stable chemical properties, no toxic side effects, acid and alkali resistance, no corrosion, no pollution, fast defoaming speed, long foam suppression time; This product can meet the defoaming needs of various domestic sewage treatment processes and printing and dyeing and other industrial sewage treatment plants, and has the advantages of easy use and cost saving.

BWX68 antifoam

Active ingredients: high temperature silicone polyether, polysiloxane, food emulsifier.

Physical properties: appearance: milky white viscous liquid, stability (3000 rpm/20 minutes); Not layered; Non-volatile substances: ≥ 25%; PH 6-8.

Product Introduction:

BWX68 is a new type of fermentation defoamer developed for the foaming characteristics of fermentation industry, the introduction and digestion of foreign advanced technology and raw materials, and a high-tech product in Jiangsu Province. BWX68 is refined by special high-temperature silicone polyether, polysiloxane and food emulsifier under specific conditions, which overcomes the shortcomings of poor high temperature resistance and short foam suppression time of silicone defoamer, and can meet the requirements of foam control throughout the fermentation cycle when used in appropriate amounts; It is recommended to reduce the amount of polyether-based defoamer by 40-50% instead of BWX68, which can quickly eliminate foam and reduce disinfection time. Due to the reduced amount of polyether defoamer, the growth environment of the strain is improved, and the potency can be significantly increased. It is widely used in lysine, gentamycin, avermectin, tymycin, citric acid, penicillin, erythromycin, neomycin, oxytetracycline, VB12, VB2, erythritol, sodium gluconate, fructooligosaccharides, xanthan gum, cordyceps fungus powder, Ganoderma lucidum powder, cephalosporin powder, yeast and many other fermentation processes.

BWX622 antifoam

活性成份：特种聚合物、改性聚硅氧烷、乳化剂、分散剂。

物理特性：外观 : 乳白色液体，不发挥物 :15-25％ ,PH 值 :6-8; 运动粘度(mPa.s,25 ℃ ):400- 800; 稳定性 (3000 转 /20 分钟 ): 不分层 ; 在剪切条件下130℃不破乳。

Product Introduction:

专业为高温高压溢流染色机及其它印染工艺而设计，适用于非离子或阴离子体系的消泡和抑泡，并可在较宽的温度和 PH 值范围内使用，具有消泡速度快、耐久性好、长期有效、稳定性好的特点，亦可用于粘合剂及粘胶的生产以及化工生产加工过程 ( 水性 ) 等。