Use
rotary solid-liquid separator (also known as rotary grid decontamination machine), it is an advanced water treatment solid-liquid separation equipment, mainly used in urban sewage treatment plants, district sewage pretreatment devices, municipal rainwater pumping stations, waterworks and power plant cooling water and other water inlets, the equipment is also widely used in textile, printing and dyeing, food, aquatic products, papermaking, slaughtering, tanning and other industries of water treatment engineering, is the ideal solid-liquid separation equipment in the water treatment industry.
Structure and working principle
The equipment adopts rotary type, by a special shape of plough-shaped rake teeth arranged on the horizontal axis in a certain assembly order, composed of rake tooth chain, according to the flow of water, assembled into different gaps, installed at the entrance of the pump station or water treatment system, when the drive device drives the rake tooth chain from the bottom up, the debris in the water is picked up by the rake chain, the liquid flows through the gap, the equipment rotates to the upper vertex, the rake chain changes the running direction , from top to bottom movement, the material relies on its own weight from the handle teeth to fall off, when the teeth from the reverse side to the bottom, and start another cycle of continuous operation, so as to continuously remove debris from the water, to achieve the purpose of solid-liquid separation.
Technical data and installation size chart

Note: P is calculated as H=5.0m, and for every 1m increase in H, P total = P1(P2)+AP; t: is the pitch of the tooth chain;

Main features
: The drive device adopts cycloid pinwheel or helical gear motor direct drive, low noise, compact structure, stable operation and other characteristics:
the frame is an integral frame structure, strong rigidity, easy installation, less daily maintenance workload;
There are two types of tooth specifications, tooth pitch t=100, 200mm;
The equipment is easy to operate, and the operation of the equipment can be directly controlled on the spot/remotely;
In order to prevent accidental overload, there is double protection of mechanical shear pin and over-telephone flow, so that the equipment runs safely and reliably. When the width of the equipment ≥ 1500mm, in order to ensure the overall strength of the equipment, it will be in the form of parallel connection.